Firstly, I would like to express my deepest gratitude and appreciation to Mr. Syed Zulkhieree Syed Hussin (Section Manager of Assembly Operations II), Mr. C.Y Ng and Mr. Luqman (Process Engineer) as they were the personals who gave me the opportunity to carry out this industrial training in National Semiconductor Melaka (NSEM). Without their continuous encouragements, guidance, opinions, and advices, and lectures throughout the 12 weeks in NSEM, I may not be able to complete this industrial training successfully.
Next I would like to thank Puan Zaharah Abdullah. She is kind, helpful and friendly. She helped me to understand the specs, the chemicals involve in solder plating and also the processes whenever I didn’t understand. Not to forget also to all QC Lab staffs.
I would also like to thank to all the technicians especially Mr. Sundralingam in my way to comprehend the mechanical system of the machines. Well, to all the supervisors and operators of solder plating in NSEM, I appreciate your invaluable views, thoughts, and ideas that you had gave me, which had helped me, gained not only knowledge but also experience.
As part of integrated curriculum of Bachelor Engineering (Hons) Mechanical programmes, industrial training for 12 weeks in National Semiconductor Melaka was a big opportunity for me to get expose in the rapid industrialization of our country.
During the period of training at this company, they assigned me to solder plating department and I:
1. Gained experience as well as hands-on in real working environment of NSEM.
2.Get acquainted with the organization structure of NSEM.
3. Understanding the business operations of this company.
4. Comprehend the administrative functions.
5. Performed several tasks that benefit to me and the company which has developed synergetic collaboration between the company and Multimedia University in promoting a knowledgeable society.
For the period of 12 weeks in NSEM the jobs assigned to me were:
1. Understanding safety rules in working area that involving chemicals by attending Advance Chemical Training provided by NSEM.
2. Figured out the whole mechanical system for the machines in the plating area assisted by maintenance engineer and senior technicians.
3. Learned process and specs of solder plating set up by the company. This task was carried out and support by process engineer.
4. Identified the abnormality in a machine by conducting research analysis in scientific method.
5. Discover the method of finding item to focus on cost minimization from the conclusion obtained from the scientific analysis. This was taught by the operation manager of the department.
During the 12 weeks of training, i have performed several tasks assigned by the manager of the department. The objective of the tasks are as below:
Task 1: To find out and fix abnormality on each chemical tank by comparing decreasing rate of chemical in every tank.
Task 2: To find out how much the usage of every chemicals involve in production in each day and establish the quantity usages of chemicals in a week, a month and relate it to the first task in order for cost minimization strategy.
Task 3: To find out the quantity of vacuum suction cups usage on MECO strip plater and determine which machine use more cups and why.
Visit NS official site at www.nsc.com
Full report is available below and it is highly confidential and password protected. If you are one of NSEM employee, you can email to webmaster asking for permission. However, webmaster cannot confirm for the authorization because it is also under authority of National Semiconductor Melaka. The report is owned by the webmaster and National Semiconductor Melaka and all rights reserved by NSEM.
Copyright © & Permissions
The Copyright of this item belongs to the author under the terms of the Copyright Act 1987. Due acknowledgement shall always be made of the use of any materials contained in or derived from this item. This Technical Report is owned by Mohamad Firdaus Bin Zainal and National Semiconductor Melaka (NSEM). It is highly confidential and controlled by NSEM. All information and data available in this technical report are the copyrighted work of National Semiconductor Melaka (NSEM) and Mohamad Firdaus Bin Zainal. Any act of copying or representation of information taken from this report without permission from NSEM is strictly prohibited. All rights reserved by NSEM. For your information, this article password and file url will be changed from time to time. This is to protect the report from being misused by unauthorized reader. For inquiry please contact webmaster@firdauszainal.com
COPYRIGHT AND INTELLECTUAL PROPERTY POLICY
- The author and NSEM respect the intellectual property of others, and we ask our users to do the same.
- Unless otherwise specified, the ITP report is for your personal and non-commercial use.
- You may not modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer, or sell any information, obtained from the ITP report.
- You may display and, subject to any expressly stated restrictions or limitations relating to specific material, electronically copy, download and print hard copy portions of the material from the different areas of the ITP report solely for your own personal non-commercial use.
- Any other use of materials on this Site, without prior written permission of the author is strictly prohibited.
- It is our policy, in appropriate circumstances and at its discretion, to disable and/or terminate the accounts of users who may infringe or repeatedly infringe the copyrights or other intellectual property rights of this ITP report and/or others.
